How To Take Apart Glock Mag

How to Disassemble a Glock Magazine: A Step-by-Step Guide

So, you've got a Glock magazine and you need to take it apart. Maybe you need to clean it, replace a spring, or fix a malfunction. Whatever the reason, knowing how to disassemble a Glock magazine is a valuable skill for any Glock owner. This guide will walk you through the process, step-by-step, with clear instructions and helpful tips.

Tools You'll Need

Before you begin, gather the following tools:

• A Glock magazine: This seems obvious, but it's important to have the right tool for the job!
• A small punch or similar tool: This will help you push out the baseplate. A plastic punch is recommended to avoid scratching your magazine.
• A clean workspace: A clean surface will prevent the loss of small parts.

Step-by-Step Disassembly

Let's get started! The process is straightforward, but paying attention to detail is key.

Step 1: Depressing the Magazine Baseplate

Carefully examine the baseplate of your Glock magazine. You'll see a small notch or slot on the bottom. This is where you'll insert your punch or similar tool.

Step 2: Removing the Baseplate

Insert the punch or tool into the notch/slot at the bottom of the baseplate. Gently apply pressure to push the baseplate away from the magazine body. You may need to apply a bit of force, but avoid using excessive pressure that could damage the magazine. The baseplate will pop off.

Step 3: Removing the Spring and Follower

Once the baseplate is removed, you'll see the magazine spring and follower. The spring will be compressed, so carefully guide the spring and follower out of the magazine body. Be mindful of the spring's tension—it can snap back unexpectedly.

Step 4: Cleaning and Inspection

Now is a great time to thoroughly clean your magazine. Use a suitable gun cleaning solvent and brush to remove any dirt, debris, or excess lubricant. While you're at it, carefully inspect all parts for any signs of wear or damage. Replace any worn or damaged components.

Reassembly: Putting it Back Together

Reassembly is essentially the reverse of disassembly. Here's a quick rundown:

1. Insert the follower: Carefully guide the follower back into the magazine body.
2. Compress the spring: Compress the spring and insert it into the magazine body, ensuring it seats properly.
3. Attach the baseplate: Align the baseplate with the magazine body and gently push it back into place until it clicks.

Troubleshooting

If you encounter any problems during disassembly or reassembly, consider these possibilities:

• Stuck baseplate: If the baseplate is stubborn, try using a slightly larger punch or applying more controlled pressure. Avoid using excessive force, which could damage the magazine.
• Spring issues: If the spring seems damaged or difficult to manage, it's best to replace it.
• Follower problems: Ensure the follower is correctly seated.

Conclusion

Disassembling a Glock magazine is a simple task when you follow these steps. Regular maintenance, including disassembly and cleaning, will help ensure the reliable function of your Glock magazines for years to come. Remember always to practice safe gun handling procedures. If you are unsure about any step, seek the assistance of a qualified gunsmith.